Framed demagnetizer TCK

 


 

Product performance: frame type demagnetizer applicable tools of copper, iron and a small amount of workpiece demagnetizing. After electrifying, the workpiece from the frame type demagnetizer can reach the middle hole through the demagnetization effect; for the planning process automation, with a magnetic conveyor belt work, increase productivity, for screws, screwdriver, demagnetization for operations. Working time is long, the operation is simple and convenient.
Usage: when the demagnetizing device is switched on and starts working, please send the workpiece from the demagnetizer came after a distance of about 1.5M from the mouth of the box after disconnecting power. The workpiece can be refined to demagnetization, must not be the workpiece is not left frame and disconnect the power, not the net magnetization demagnetization and because of. Pay attention to the waterproof, the workpiece can not be water pass through the frame, easy to produce static electricity, or water leakage destroy coil. Pay attention to moisture in the air in the operation of equipment when the attention of electricity.


Model	Dimensions	Voltage	Sustained percentage	Residual magnetism	Net Wight	Packing size (cm)
TCK-12	830*590*1240	220	60%	≤0.2MT	170	99*68*142

Features:
Suitable for automatic planning process, combined with a magnetic conveyor belt work, increase productivity, for a variety of magnetic conduction workpieces such as demagnetization for operations. The workpiece may work for long time, continuous rate is high, the operation is simple and convenient.